Double Station Extrusion Blow Molding Machine For 20L (5 Gallon) Plastic Bottle with View Stripe Line
SLBUD series:
1: this machine is suitable for the production of 200ML 20L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.
2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3: Temperature control parameter screen: It is mainly used to set the PID parameters of each section of temperature control to achieve a higher precision control temperature.
Temperature Trend Graph Screen 1~8: Click 1~8 segment temperature and each current value enters each temperature trend graph screen to display the heating process of each temperature control section.
Operation status monitoring screen: Click this button to enter the running status monitoring screen, which is mainly used to monitor the current status of PLC running.
System time correction: Press this key to enter this screen to adjust the current system time.
Current alarm inquiry screen: When the alarm and fault information occurs when the system is running, press the alarm query button on the “main control screen” to enter this screen, prompting the fault occurrence point to be excluded.
| SPECIFICATION | SLBUD-90 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 20 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6,8 |
| OUPUT(DRY CYCLE) | PC/HR | 220x2 |
| MACHINE DIMENSION (LxWxH ) | MM | 5200x3200x2400 |
| TOTAL WEIGHT | TON | 15T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 160 |
| PLATEN OPENING STROKE | MM | 350-750 |
| PLATEN SIZE(WxH) | MM | 600x600 |
| MAX MOULD SIZE(WxH) | MM | 600x580 |
| MOLD THICKNESS | MM | 360-420 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 90 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 140 |
| BARREL HEATING POWER | KW | 30 |
| NUMBER OF HEATING ZONE | ZONE | 5 |
| EXTRUDER MOTOR RATED POWER | KW | 45 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 3-12 |
| POWER OF DIE HEATING | KW | 10-30 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 250 |
| CENTER DISTANCE OF THREE DIE | MM | 130 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 280 |
| POWER | |
| MAX DRIVE POWER | KW | 50 |
| TOTAL POWER | KW | 110 |
| FAN POWER OF SCREW | KW | 4 |
| AIR PRESSURE | MPA | 0.8-1 |
| AIR CONSUMPTION | M3/MIN | 0.6 |
| AVERAGE ENERGY CONSUMPTION | KW | 35 |
Product Tags:
|
|
Extrusion 4 Heads 5 Gallon Bottle Blow Molding Machine Double Station PE Images
|
